Examples of activities of energy saving

The article examines in detail the list of all the types of organization of activities of conservation of electricity.

Models of organization of activities of energy saving

• The designation of a person responsible for the activities of energy saving
• Training in the field of energy saving and improve the energy efficiency of the personnel, responsible for the actions of energy savings
• Engage staff on energy savings
• The improvement of the institution's work and optimization of the functioning of the lighting systems, ventilation, water distribution
• The introduction of the graphics enable and disable the lighting systems, ventilation, thermal curtains, etc
• The rationing of the energy consumption
• The designation of the responsible control of the activation and deactivation of systems
• The organization of work on functioning of lamps, cleaning
• Awareness-raising activities with students and staff on the issues of energy saving
• Strong awareness on energy savings
• The development and implementation of the system of promotion of staff of the institution for actions aimed at the conservation of energy
• The improvement of technical knowledge in the field of energy-saving of certain categories of the staff of the institutions
• The creation of a management system

Examples of technical activities energy savings

The power supply system

• Installation of load switches before input power transformers
• The elimination of the defects of switching and power equipment
• Replacement of the voltage oil, vacuum switches
• Replacement of old transformers on the
• Reduction of electricity losses in wired networks
• The reduction of energy losses by improving power factor
• The increase of the coefficients of energy consumers and positions and to limit their idling
• The maintenance of the drift of the voltage levels in the networks
• A uniform load distribution on the phases of
• The distribution equipment, power monitoring systems electric energy consumption
• The reduction in the number of personal appliances (train, coffee makers, electric kettles etc)
• Optimization of the time-of-use of office equipment
• The application of the frequency regulation of pumps, water supply systems
• The Adoption of energy-saving dishes from the kitchen electric hob
• Install thermostats on electric heating systems

Lighting system

• The decrease of the electricity consumption on the objectives of the lighting the way of the reconstruction of the current system of the lighting through the installation of the energy efficiency of light sources
• Reduce the field of application of the incandescent lamps and replace them with lamps with fluorescent bulbs
• Replacement of the fluorescent lamps of old, the lamps of new generation, less power
• The replacement of the traditional lighting systems to led
• The replacement of the solenoid valves of regulation of fluorescent lamps, more reliable and cost-effective electronic
• The colouring of the walls of the premises in the lighter tones
• The decentralization of the lighting through the installation of more switches and the division of the square of light on the areas of your choice

Heating system

• The drafting of user manuals, management and maintenance of heating systems, periodic monitoring of the agencies of management of the implementation of
• Equipment and systems of heating appliances, accounting
• Hydraulic adjustment of the interior of the heating system
• Annual cleaning of the interior surfaces of the heating the heating system and the heat exchangers
• Automation of heating systems in buildings by installing individual thermal (ITP) with adjustment of the power into heat
• The removal of ornamental fences with heating radiators
• Install reflectors behind the radiators of heating
• The installation of shut-off valves for thermostatic valve on the radiators of heating
• The replacement of one system of heating tube on the two pipe
• Installation of curtains thermal

Hot water system

• The drafting of operations manuals, management and maintenance of hot water systems, periodic monitoring of the agencies of management of the implementation of
• Automation of the management of the GVS
• Software recycling of the water in the heating system
• The reduction of the consumption due to cost optimization and regulation of temperature
• Equipment systems, hot water counters, hot water consumption
• Reduce the loss of heat during transport on the pipes through the insulation
• The implementation of the thermal insulation on the basis of ultra fine heat insulation cover
• The economic application of the frame folding
• The reduction of costs and water losses

The consumption of water

• The replacement of the dilapidated condition of the steel pipelines of the water
• Implementation of systems of water recycling
• The implementation of the systems of water treatment
• The economic application of the frame folding
• The reduction of costs and water losses

The recovery of the heat

• The introduction of the heat recovery in the building
• Improving the energy efficiency of dryers

Ventilation system

• Optimization of the functioning of ventilation systems
• The deactivation of ventilation systems during the lunch break and after hours
• Blocking the fan of the air curtain with the opening mechanisms of the doors
• Replacement of old fans with lower PERFORMANCE modern with greater EFFICIENCY
• Replacement of old drives to ventilation systems, low-YIELDING, modern with greater EFFICIENCY
• The application of the frequency regulation of the rotation speed
• Use of automatic devices for regulation and control of ventilation as a function of the temperature of the air outside (especially with the help of VOD)

Air-conditioning system

• Turn on the air conditioner only when necessary
• The exception of overheating and under-cooling of the air inside
• The maintenance of the regulators to the surface of the heat exchanger and the equipment

jpg" class="imgblock right center_mob">

Pumping systems

• The modernization of pumping units
• The modernization of the electric control of the pump
• The stabilization of the pressure in the hydraulic systems

The compressed air system

• The implementation of an automated system of management of process of production of compressed air
• The decentralisation air supply
• The implementation of the drying system to request information from the compressed air on the compressor station
• The modernization of compressor refrigeration machinery

Electrical equipment

• The implementation of welding inverters in chip control circuit
• The minimization of energy losses in the welding station equipment in case of rupture of the arc
• The modernisation of grinding aggregates galvanic phase
• The implementation of facilities to a high temperature heating load

Construction materials and protect the structure of the building

• Reduce the heat loss of the heat through the window openings by the installation of the third glass or PVC between frames in the space of the windows
• The reduction of heat loss through the window openings by installing economic reflecting film on the windows
• Additional glazing polycarbonate honeycomb
• The improved thermal insulation of facades, floors, walls, and floors of the attic, the roof, etc
• Reduce the heat loss of heat by jacketing of compensation, the joints between the panels of houses
• Hydrophobization of the walls (the product of wall covering)

The boilers and thermal power plants

• The development of guides and maps to plan operation, management and maintenance of the equipment and periodic monitoring of the organizations management of the application
• The maintenance of a coefficient of excess air and a good mix with the fuel
• The installation of surface water in the economizer because of the boiler
• The application for appliances for heating aggregates facilities deep-heat-recovery facilities use of the latent heat of vaporization from the combustion gases (contact heat exchanger)
• An increase of the temperature of the feed water at the entrance into the drum of the boiler
• The heating of the feed water in the steam water heat exchanger
• Maintaining in clean condition the exterior and interior surfaces of the heating of the boiler
• Cleaning of tartar with the interior of the boiler furnace, heating by ultrasound
• The use of the heat of the secretion of the boiler by a barrier of warm air from the top of the area of the boiler room and its suction pipe of the fan
• Outside insulation and the inside of the boiler and pipes, sealing of the valves and paths of boilers (the temperature on the surface of the masonry should not exceed 55 ° c)
• Installation of accounting systems in the cost of fuel, electricity, water and heat release
• Automation of the management of the work of the boiler room
• The application of the frequency drive for regulating the speed of rotation of the pumps, fans, and snails
• The translation of steam boilers in the boiler mode
• The translation of the vapour of a water heating system
• Rational simultaneous downloads boilers
• Installation of the cogeneration unit (CHP)
• Installation of a system to return the condensate
• The installation of a dilator continues to bleed and the water heater gross
• Restoration of the masonry of boilers

Vehicles

• The translation of the car from petrol to gas
• Maintaining a uniform pressure of the air in the tires

The accounting of the energy

• The implementation of the automated information-measuring systems (objectives) of the accounting of heat and electricity.
• The modernisation and extension of the system of exchange of technological information
• The creation of a centre for the collection and processing of data

The energy savings in the company is one of the major problems faced by the industry. This is due to the constant rise in the cost of electricity and other energy sources. The production lose their finances on the raw materials, fuel, on the exploitation, but the most expensive is to pay for the energy component.

Energy saving in the event that you will spend on your business will allow you to significantly reduce the cost of energy and therefore positively affect the technical indicators of the work of the company or of the production. It is immediately observed in the increase of profitability and improvement of the competitiveness of its products, reducing the cost of production or services.